FORUM8 Design Festival 2012-3Days |
| Lectures Details Page |
|
The 13th FORUM8 VR Conference |
| Special Lecture |
10:00-10:50 |
 |
|
Associate Professor of Graduate School of Osaka University
Tomohiro Fukuda |
|
"Utilization of cloud computing VR
and SNS and their future vision"
Today, globalization and computerization is happening so fast that you can actually feel the changes constantly taking place. Within these changes, the difficulty of conducting a meeting in the same place at the same time or sharing information by distributed and unsynchronized communication tool such as an email remain as issues we must overcome. Hence a distributed and synchronized type of stakeholders/residents meeting in which information can be shared within a common 3D virtual space simultaneously by participants located in different places was envisaged. Dr. Fukuda will introduce the fruits of his project of urban design and landscape creation as well as the future task. |
|
|
|
| Born in Kakogawa, Kobe prefecture, Japan in 1971. Associate professor in
Graduate School of Osaka University, doctor in engineering, specializing
in informatics of environmental design. Author of "VR presentation
and new city modeling". |
|
|
|
The 13th UC-win/Road Conference Driving Simulation Sessions |
| Special Lecture 1 |
13:00-13:50 |
 |
|
Associate Professor of Mechanical Engineering, Department of Engineering,
Ibaraki University
Youhei Michitsuji
|
|
"Simulation utilized for a research
on the mechanism of predicting danger while driving on the
road"
Recently, designing an environmentally friendly traffic, road, and vehicle
is considered an important task for all those involved in the design process.
On the other hand, measures against large number of fatal traffic accidents
that occur every year are regarded as very important measures we must put
to action, most notably measure for "zero" accidents. With this
background in mind, a research focusing on the reduction of car and pedestrian
accidents has been initiated. Professor Michitsuji will talk about how
dangerous behaviors of a pedestrian based on the data acquired from 'drive
recorder' are reproduced in 3D VR space as well as case studies of VR simulation
used to propose accident prevention system and to evaluate its effectiveness. |
|
|
|
| Youhei Michitsuji is an associate professor of Mechanical Engineering who conducts research on vehicle safety system that helps prevent accidents and vehicle dynamics as a specialist in vehicle dynamics studies and controlled engineering. |
|
|
| Special Lecture 2 |
13:50-14:35 |
 |
|
Professor of Kyushu University
Kazunori Shidoji
|
|
"Driver behavior analysis using a driving simulator for
the development of ASV"
It is very important to understand driver behavior when developing an Advanced
Safety Vehicle. By understanding driver's driving behavior peculiar to
the driver, we are able to examine the kind of assistance system that is
required and the best way of providing that assistance system. In his lecture,
he will introduce his research in which the driver behavior recorded in
the real car is blended with the driver behavior analyzed by a driving
simulator, an innovative research he is currently conducting in his research
lab. |
|
|
|
| Science and Electrical Engineering, Kyushu University. Chief Traffic Psychologist.
Japan Association of Traffic Psychology (Regular member of Operation Committee,
Chair of Public Relations Committee). |
|
|
| Presentation 1 |
14:35-15:00 |
"Expansion of driving simulation
feature and future developments"
Pencreach Yoann, FORUM8 VR development Group |
|
He will explain the overview and the fundamentals of driving simulator system that utilizes UC-win/Road and then elaborate on the development of the driving simulator he is engaged in that brings innovation via integration of enhanced features. He will also introduce the latest features and the development plan of UC-win/Road. |
|
| Special Lecture 3 |
15:15-16:00 |
 |
|
AISIN SEIKI Co., Ltd.
Keiji Kuzuya |
|
"Case study of VR in the development of Advanced Driver
Assistance System"
Some of the goals of the ITS is to reduce traffic accidents and to mitigate traffic congestion. ITS demo car and a demo vehicle made of real car compartments to which Virtual Reality technology is integrated to realize driving experience has been built portraying the trend of the state-of-the-art Advanced Driver Assistance System technology, and showcased in last year’s ITS World Congress in Orlando. He will talk about the system’s overview, features, case studies that involves the use of scenario functions, and the hard work that was required to complete the driving simulator. |
|
|
|
| He has been engaged in the technology development regarding ITS and worked
the development of the exhibition system via VR as a project manager of
ITS driving system development department 2G in AISHIN SEIKI Co., Ltd. |
|
|
| Special Lecture 4 |
16:00-16:45 |
 |
|
TOPCON corporation
Hiroyuki Fujii |
|
"Mobile mapping system and automatic data creation in VR space"
Mobile Mapping System is a system that captures a panoramic view of the
city with a vehicle mounted camera facing all directions (360 degrees)
and visualizes the view in 3D space via CV technology. By linking VR and
measured results, the possibility of them becoming applicable to various
field is born. The overview of Mobile Mapping System and its linkage with
VR will be introduced with case studies. |
|
|
|
| Director of 3D/Mobile Sales Department, TOPCON corporation. He has been engaging in the proposal of the system produced by the company since the 3D Laser Scanning device for observation was founded. |
|
|
| Special Lecture 5 |
16:45-17:30 |
 |
|
Professor in the Department of Transportation Engineering, Tongji University
Guo Zhong Yin |
|
"Application of VR technology in traffic safety in China and the future
vision"
He will explain the application of Virtual Reality technology in China's
road and traffic industry and the future vision from the aspect of safety
assessment, safe operation of infrastructure to prepare for various events
and phenomenon, and road construction project management. He will also
introduce the advantages of VR inclined to this industry and summarize
the current status of VR application from the standpoint of road and landscape
design. |
|
|
|
| College of Traffic and Transportation Engineering, Tongji University. He
is the sub leader of Experiment Lab for Education of Chinese Roads and
Traffic Process, member of the World Road Association, and Chairman of
Society for China's Road Safety. |
|
|
|
The 6th Design Conference Geotechnical analysis sessions |
| Special Lecture 1 |
10:00-10:50 |
 |
|
Associate Professor in the Graduate School of Engineering, Gunma University
Fei Cai |
|
"Adaption of geotechnical dynamic analysis including liquefaction analysis and its application"
He will report the verification study for the earthquake-proof of geotextile-reinforced embankment with double-walled structure by comparing the dynamic analysis result and dynamic centrifuge test result. He will also introduce the comparison result of 3D liquefaction analysis with dynamic centrifuge test of road embankment using box improvement method. Currently the sinking of vessels resulting from the liquefaction of micronized ironstone and nickel ore which is caused by the vessel rolling has been increasing, and the attempt to find out its sinking mechanism using liquefaction analysis will be introduced. |
|
|
|
| He will introduce the future revision and development of geotechnical analysis
series. In addition, while "renewable energy" has currently gained
wider acceptance as compared to before, the effort and trend regarding
"use of earth thermal" will be reported and its productization
will be introduced. |
|
|
| Presentation 1 |
10:50-11:15 |
"New features of geotechnical analysis series products and the development
plan of "GeoEnergy""
Atsushi Nakamura, FORUM8 UC-1 Development Group1 |
|
He will introduce the future revision and development of our geotechnical analysis series products. In addition, while "renewable energy" has currently gained wider acceptance as compared to before, the effort and trend on "use of geothermal energy" will be reported and the concept of making a product that utilizes this kind of energy will be introduced. |
|
| Special Lecture 2 |
11:15-12:00 |
 |
|
Nisshin Engineering Consultants Co., Ltd.
Shojiro Imahashi |
|
"Analysis case of peripheral filling for tunnel excavation via GeoFEAS"
He will evaluate the formation of an improvement zone to the influence ground which is conventionally performed and the expected deterrent effect on ground sinking by doing peripheral filling from the tunneling machine without using influence bulkhead for the ground in which the ground displacement associated with the tunnel drilling by shield driving method and semi-shield driving method is expected to exceed the allowable sinking amount. |
|
|
|
| He has worked at Nisshin Engineering Consultants Co., Ltd. and has engaged in the shield driving method and the design of tunnel drilling method as a design engineer of pipe and drain facility. |
|
|
| Special Lecture 3 |
13:00-13:45 |
 |
|
Koa Kaihatsu Co., Ltd.
Atsuo Onoue |
|
"Landslide and liquefaction phenomenon caused by an earthquake and
the analysis on their reproduction"
He will introduce the numerical simulation based on 2D dynamic elasto-plasticity EFM for the dip slope failure (Yokowatari-chiku, Ojiya city) that occurred off 2004 Niigata Prefecture Chuetsu Earthquake. Moreover he will also introduce the study results about the liquefaction phenomenon in Kariwamura Inaba that occurred off Chuetsu Earthquake and its analysis and the liquefaction phenomenon in Asahi city of Chiba prefecture that occurred off Japan's Tohoku earthquake and its analysis. |
|
|
|
| Professor emeritus of Nagaoka National College of Technology. Technical
adviser of Koa Kaihatsu Co., Ltd. Doctor of engineering. Professional engineer
(in construction, soil and foundation). |
|
|
| Special Lecture 4 |
13:45-14:30 |
 |
|
President, Bulld Geotechno Co., Ltd.
Toshihiro Hanada |
|
"Introduction of an analysis using GeoFEAS to tackle the problem of displacement stability of infrastructure constructed adjacent to RC building"
He will introduce the case study to have confirmed the safety of a structure
by analyzing the transform problem of neighboring construction via GeoFEAS.
Although this case is to construct the road retaining wall, the construction
method was subject to the restriction according to the condition of a construction
site and the RC architecture with basement parking area is adjacent to
the wall. Therefore its safety was evaluated by analyzing the transformation
and stress of the whole structure using GeoFEAS for the safety evaluation
of whole structure including retaining wall. |
|
|
|
| President, Bulld Geotechno Co., Ltd, professional engineering (construction department / general technology department). Specialized in retaining wall design, soil structure and design and analysis of basic structure. |
|
|
| Presentation 2 |
14:30-15:00 |
"Analysis case via UWLC and GeoFEAS"
Hiroyuki Kimura, FORUM8 Analysis Support Team |
|
He will introduce the following 3 things. (1) Influence study to the elevated
bridge with pipe jacking and shaft construction in the evaluation of the
effect of adjacent construction via GeoFEAS2D. (2) Level2 earthquake-proof
verification of underground structure via dynamic effective stress analysis
UWLC of ground. (3) 3D analysis case of foundation on a slope via GeoFEAS3D. |
|
|
The 6th Design Conference Civil design/Analysis |
| Special Lecture 1 |
10:00-11:05 |
 |
|
Professor of Graduate school of Engineering, Gunma University
Ukai Keizo |
|
"Geotechnical analysis and the front line of geothermal heat energy
development"
Currently the use of earth thermal which is one of the natural energy has been wider acceptance as compared to before. It is known that the earth temperature is almost constant throughout the year (The average temperature on the ground is almost equal). The reduction of the amount of electricity is attempted by doing heat exchange of air conditioner underground using the nature of the earth temperature. It has been widespread overseas, however, it is very recently its introducing in Japan. He will introduce the experimental case of earth thermal use, introduction example and simulation method. |
|
|
|
| Professor of Graduate school of Engineering, Gunma University. Director of The Japan Landslide Society (2012). Chairman of the study group of the earth thermal of NPO Highland Kanto Liaison Organization. |
|
|
| Special Lecture 2 |
11:05-11:50 |
 |
|
Hyogo Earthquake Engineering Research Center
Tomohiro Sasaki |
|
"Developing a technology for reducing the damage potentially inflicted
by a disaster by an experiment of fracturing life size structure using
E-Defence"
Vibration experiments for various actual structures such as RC pier and
steel construction using E-Defence vibration stand have been conducted
in Hyogo Earthquake Engineering Research Center. Here the experiments which
have been conducted so far using RC pier and steel construction will be
introduced. |
|
|
|
| Fellow of Hyogo Earthquake Engineering Research Center. He was affiliated with Tokyo Institute of Technology for 1 year as a fellow of Japan Society for the Promotion of Science. Doctor (Engineering). |
|
|
| Presentation 1 |
11:50-12:00 |
"Revision of specifications for highway bridges and the future development
of FORUM8's products"
Okamura Yoshiaki, FORUM8 UC-1 Development Group 2 |
|
Since the revised Specifications For Highway Bridges has been released in the end of April, FORUM8 has released the supported products. The latest support for the revision of other road construction of Specifications For Highway Bridges and future development will be introduced in this presentation. |
|
|
The 6th Design Conference Civil design/General sessions |
| Special Lecture 1 |
13:00-13:40 |
 |
|
Former vice president of NEC, now an advisor of FORUM8 Co., Ltd
Toshiro Kawamura |
|
"Trend of information transmission revolution and Cloud, and our mission"
After his engaging in a development director of main frame computer ACOS in NEC, he had been eager to the development of super computer and had engaged in a development director of large-scale system in a financial institute, civil service and private companies etc. He had also engaged in controlling the main business unit of IT solution business. Based on these lots of experience, he will introduce the use of cloud system and its trend and also the task and its solution for overseas advance. In addition, global project which will be very helpful for business strategy of users will be introduced as a current special advisor of FORUM8. |
|
|
|
| Former vice president of NEC. He currently realizes co-creation with overseas as a president of Collabo Business Consulting and has been a special advisor of FORUM8 since this April. |
|
|
| Presentation 1 |
13:40-14:05 |
"Latest features of VR-Cloud® and its future technical development"
Christophe Soulier, FORUM8 Super Computer Kobe Laboratory |
|
He will introduce the latest version of VR-Cloud® which has the easy-operable feature of 3DVR contents and has supported a smart phone of Android™ OS and tablet. He will also introduce the server products designed for software use which requires large amount of graphic processing including VR-Cloud®. |
|
| Presentation 2 |
14:05-14:30 |
"Utilization of High-performance computing on cloud® and UC-1 for
SaaS"
Tadato Ishikawa, FORUM8 Sales Group |
|
He will introduce about super computing cloud service such as analysis cloud service, noise super computing analysis, wind and thermal fluid analysis and CG movie service in which high computing capability is used and the service under development. Also various products of UC-1 for SaaS, Groupware available even with basic license and utilization method and latest information of various service will be introduced. |
|
| Special Lecture 2 |
14:30-15:10 |
 |
|
Toyo-Giken Consulting Civil Engineers Inc.
Shigeo Nagakubo |
|
"Designing large-scale junction using UC-win/FRAME(3D)"
He will introduce an analysis model of the ramp bridge that he created
using UC-win/FRAME(3D) when designing a large-scale junction in which road
for cars and road for bicycles intersect, emphasizing on the flow of actual
design and the method of evaluating the result from the designer's standpoint. |
|
|
|
| Engineering chief of Engineering department of Tokyo branch office of East
Japan business department of Toyo-Giken Consulting Civil Engineers Inc. |
|
|
| Special Lecture 3 |
15:25-16:05 |
 |
|
Technical Manager of Murufuji Engineering, Corporation
Tetsuya Watanabe |
|
"Example of nonlinear dynamic analysis on waterworks facility using
Engineer's Studio®"
The Great East Japan Earthquake caused quite a lot of damage to water utilities. There is an urgent need to develop a water delivery system resistant to disaster in order to minimize damage at the time of the great quake. He will introduce the example of damage prediction at the time of great earthquake using Engineer's Studio® and its future development and tasks. |
|
|
|
| Technical Manager of Murufuji Engineering, Corporation. He has long years of experience in planning, designing and construction of water facility including distribution reservoir. |
|
|
| Special Lecture 4 |
16:05-16:45 |
 |
|
Professor of Civil Engineering, Department of Engineering, Tokai University
Shunichi Nakamura |
|
"Research related to ultimate strength and destruction process of
bridge using Engineer's Studio®"
He has developed the new type of bridge such as inclined-arch suspension bridge, cable-stayed bridge tower and arch rib and has evaluated its static / dynamic behavior, ultimate strength and collapse process. He will introduce the analysis example using Engineer's Studio®, mainly his experience in conducting the simulation analysis for the steel truss bridge which collapsed in Minneapolis, USA in 2007 and evaluating its fracture toughness. |
|
|
|
| Professor of Civil Engineering, Department of Engineering, Tokai University.
He won Tanaka Award (Best Research Paper May 2000) by Japan Society of
Civil Engineers, The Outstanding Paper Award by International Association
for Bridge and Structural (September 2005) and has been honored as an Outstanding
Reviewer by American Society of Civil Engineers (May 2005). |
|
|
| Presentation 3 |
16:45-17:15 |
"New Engineer's Studio® that supports Revision of Specifications for
Highway Bridges and analysis support service"
Yoshitaka Kai, FORUM8 Analysis Support Team |
|
FORUM8 has been conducting analysis according to the revision of Specifications For Highway Bridges. He will introduce the comparison of analysis results due to new/old Specifications For Highway Bridges. Moreover a few points of caution and tendency when analyzing, the latest trend of analysis support service and technology direction will be also introduced. |
|
|
The 6th Design Conference Architecture/BIM sessions |
| Special Lecture 1 |
10:00-10:50 |
 |
|
Professor of Keio University
Yasushi Ikeda |
|
"Architecture/Information/Design technology"
The change in information transmission and sharing method in the field
of architecture caused by BIM that takes care of the whole 3D design data
has not only made a big impact on various design and construction process
and role of civil design work as well its efficiency and streamlining,
but also initiated innovation in architecture creating many new technical
possibilities. He will talk about the trend we see today where the border
between design and construction, specialist and users, and virtual and
real world are disappearing, and the 3 technologies - architecture, information
and design - are fusing into and developing as one taking into account
the movement of advanced case studies in Japan and overseas in recent years. |
|
|
|
| An Architect. Professor of Keio University. Doctor (Engineering). Representative
of IKDS. He has put his opinion and works on the relationship between architecture
/ urban city and information technology. The chairman of Virtual Design
World Cup (The 2nd Student BIM & VR Design Contest on Cloud). |
|
|
| Special Lecture 2 |
10:50-11:30 |
 |
|
SWEE HONG Limited.
Kenneth Lim |
|
"Utilization of UC-win/Road for BIM"
BIM software is gaining its popularity in the construction market worldwide. He will introduce the case study of "BIM&VR" in which the project conducted in Singapore was designed via BIM software:Allplan, and its designed data was simulated in VR environment via UC-win/Road. |
|
|
|
| Vice president of Swee Hong Engineering Construction Pte Ltd. which is
a civil engineering company representing the country Singapore itself.
He has been engaged in introducing BIM in the project of the company since
2010. |
|
|
| Presentation 1 |
11:30-12:00 |
"BIM Solution, 3D/VR Engineering Service”-Allplan, UC-win/Road, DesignBuilder, and other various technical services"
Shunta Shimizu and Jun Imaizumi, FORUM8 VR Support Group |
|
He will introduce case studies of 3D bar reinforcement of RC structure
designed by Allplan, energy analysis of double-skin architecture via DesignBuilder,
and VR environment created by combining point cloud measuring / 3D model
with UC-win/Road, each as an ideal BIM solution.. Virtual Design World
Cup , which is an international BIM&VR competition for students, the
work that won the Grand Prix in the first competition last year, and the
task of the second competition will be also introduced via VR-Cloud®. |
|
|
The 6th Design Conference Hydraulic engineering sessions |
| Special Lecture 1 |
13:00-13:50 |
 |
|
Professor of Graduate School of Engineering, Hiroshima University
Yoshihisa Kawahara |
|
"Issue of disaster caused by heavy rainfall and flood analysis technology"
The feature of the heavy rain has been changed as seen in typhoon No.12 and local torrential rain in 2011. He will introduce the recent torrential rain and the effective utilization of X Band MP Radar for both practical and theoretical measures as well the direction to which the technology is headed. He will also introduce necessity of maintaining rainfall data, urban structure data, sewerage / drainage data and immersion data as well as performing plane 2D analysis on the flow of flood water and run-off through river channels. |
|
|
|
| He is engaged in developing flood analysis system for modeling the interoperability
of flood flow and vegetation and for reducing water disaster. He is also
engaged in developing environment research technology via a drone. |
|
|
| Special Lecture 2 |
13:50-14:30 |
 |
|
Professor of Civil Engineering, College of Engineering, Shibaura Institute
of Technology
Masaru Morita |
|
"Risk assessment on Urban Rain water drainage using xpswmm"
In his lecture, he will clearly state how far xpswmm has come looking back
at the history of outflow analysis model for urban rainwater drainage.
Moreover, he will explain the method of quantifying flood risk by combining
xpswmm and model for estimating inundation damage and then present the
whole frame of flood risk assessment. As an example of flood risk assessment
application, he will present an example of calculation on 2 areas in charge
of draining rainwater, alluvial plain and diluvial plateau, and then introduce
Risk Impact Factor, which is comprised of the structure of flood risk and
risk assessment index. |
|
|
|
| Professor in Department of Civil Engineering, College Engineering, Shibaura Institute of Technology. He specializes in urban hydrology and underground water hydrology. Lately, he is actively involved in the research on flood risk management. |
|
|
| Special Lecture 3 |
14:30-15:10 |
 |
|
Professor in the Department of Urban Engineering, Graduate School of Engineering, Tokyo University
Hiroaki Furumai |
|
"Current status and issue of predicting damage done by flood including
the affected water quality in Hue, Vietnam"
Hue city of Vietnam frequently suffers from immersion not only because it is at a low altitude but also because its channel network, ponds, and swamps lack the ability to pool water or send it underground. In addition, water pollution in the water channels and ponds due to unprocessed sewage water flowing into them at the time of immersion is causing great health concerns. And so, in this lecture, based on the result of various immersion scenario analysis, the immersion feature will be clarified from the perspective of water level contour, pond’s pooling ability, water channel etc. and at the same time the task of data collection for immersion analysis will be introduced. |
|
|
|
| Professor at Civil Engineering, Graduate School of Tokyo University. Field
of specialty: Urban environmental engineering. Area of research: Urban
rainwater management, water environment protection. He has won many awards,
most notably the 2010 Japan Water Environment Society's academic award. |
|
|
| Special Lecture 4 |
15:25-15:50 |
 |
|
Hihon Suiko Sekkei Co., Ltd.
Takafumi Kobayashi |
|
"Case Study of tsunami and inundation analysis using xpswmm"
Examination case for effective tsunami provision to protect sewage facilities
will be introduced. Damage can be estimated very accurately by the immersion
simulation of tsunami via xpswmm in order to contribute to efficient and
effective establishment of tsunami provision in sewage facilities. He will
also introduce the point to remember when simulating immersion, method
of utilizing calculated result, and room for improvement. |
|
|
|
| General Manager of Sewerage Planning Department of Tokyo Branch Office, Nihon Suiko Sekkei Co., Ltd. He is involved in establishing sewerage plan. Graduated as Civil Engineering major in the Department of Production Engineering, Nihon University (March 1998). |
|
|
| Special lecture 5 |
15:50-16:15 |
 |
|
Senior Hydraulic / Coastal Engineer BMT WBM Pty Ltd.
Phillip Ryan |
|
"Rapid Inundation Modelling using a GPU Solver of the Full 2D Long
Wave Equations"
The use of Graphical Processing Units (GPU or graphics cards), which effectively
offer hundreds of parallelized cores, provides the opportunity to significantly
reduce the run times of 2D models. A number of parallelised 2D solvers
are emerging; however, many use simplified versions of the 2D hydrodynamic
equations. The simplifications can reduce the model's accuracy, especially
in deep water or low Manning's n, where the bed resistance term is less
dominant. A 2D GPU solver has been developed for the XP-2D software that
solves the full 2D equations, that is it includes inertia and sub-grid
scale turbulence (eddy viscosity). . This exciting new capability is now
being used for whole of catchment modelling, tsunami inundation, 2D flood
forecasting models and high resolution, fine scale, fully 2D solutions.
Examples of benchmark tests, flume models and real-world applications are
presented. |
|
|
|
| He is involved in numerical modelling projects in the flooding and coastal
areas. These include flood studies, floodplain management studies, flood
impact assessments, storm tide studies, Monte Carlo analysis, wave modelling,
coastal hydrodynamic and advection-dispersion modelling. Phillip co-ordinates
the TUFLOW and TUFLOW FV pre and post processing utilities and manages
TUFLOW and TUFLOW FV support and training. |
|
|
 |
|
Host: Ishikawa Takateru, Water Environment Construction Club (Non Profit Organization)
Kouki Ishikawa |
|
"Method of utilizing water works analysis and the future vision"
Torrential rain that fell mainly in the northern area of Kyushu from July 11th to 14th of this year caused great damage. Also, after the Great East Japan Earthquake, Japanese citizens became more conscious about disaster prevention as it is now focused on when planning any kind of business. Under these circumstances, BCP (Business Continuity Plan) has gained wider acceptance and with that in mind he will introduce the current situation of the method of analyzing immersion and tsunami etc. focusing on the application of water works analysis for risk assessment. Discussions will be carried out with academic experts and swmm users. |
|
|
|
| Completed his Masters in Michigan State University in 1975; Managing Director of Osaka Branch, Nihon Suiko Sekkei Co. Ltd.; Chairman of Water Environment Construction Club; Special professor in Graduate School of Kyoto Business Administration and Management University. |
|
|
| Presentation 1 |
17:00-17:15 |
"Waterworks series and proposal of an analysis with xpswmm application"
Hada Makoto, FORUM8 UC-1 Development Group 1 |
|
He will introduce FORUM8's improving lineup of UC-1 waterworks series.
Moreover, the method of creating a detailed model for river backflow caused
by tsunami and simulating breakwater collapse will be introduced as new
application of xpswmm that provides ideal solution for measuring and strengthening
seismic resistance of dam and reservoir for agriculture and estimating
damage, which are all actions taken by increasing number of people due
to fact that Great East Japan Earthquake destroyed dams and reservoir for
agriculture in many places. |
|
|
