Product Specification
|
|
"UC-Draw Tools (Abutment)" is the program to generate automatically drawings such as the bar scheduling, the working drawing, rebar table of the bridge abutment main unit, wing and approach cushion in lump-sum, and it has the following characteristic.
- Speedy drawing creating
Because it generates a drawing data internally by lump-sum by entering a geometry and arrangement-of-bar information, the bar scheduling drawing of the abutment to have a purpose is gotten by short time.
- Material computation work's cancellation
The material calculation is done according to the shape information, the rebar information which were entered and the standard value, the rounding, the hasp which were set at the construction condition, the working drawing, the rebar table, the quantity table are generated automatically, so that the calculation work of the size and the volume of the rebar and the concrete volume are cancelled. Also, it is possible to do the length decreasing calculation and to generate the change table as occasion demands.
- Adoption of the simple entry and the detailed entry
For the data entry about the bar arrangement, the simple entry which can generate the bar scheduling by little entry such as the standard pitch and the bar arrangement method etc. and the detailed entry which can generate the bar scheduling with high degree of freedom by entering the arrangement starting position, the pitch, the number of pitch etc for each rebar are supported.
- Compatible in the fine drawing format.
It is possible to do the fine setting of drawing formats such as the dimension line and the leader line, the character and the table at the construction condition. Each diagram can do fine diagram generation because it is generated based on the setting.
- Drawing creating according to the various standard kind
It is possible to do the drawing creating which is based on the following standard kind.
* The CAD drafting standard (The plan) The Ministry of Land, Infrastructure and Transport
July, 2003 version
* The drawing creating point by the CAD (The plan) Japan Highway Public Corp. October, 2001 version
Also, it is possible to do the construction which was based on the following standard, too.
* The civil engineering structure design manual (The plan) November, 1999 version
* The engineering works drafting standard 2003 small revise
- Confirmation, Editing, and Print of a generation drawing
It is possible to do the confirmation display of the generated drawing, to do the editing (the position adjusting) of the diagram, the dimension line, and the leading line, and to do the print to the printer and the plotter.
- Compatible for the drawing file output with a wide range of forms
It is possible to do the file output of the "SXF","DXF","DWG","JWW","JWC" form of the file with the file of the original form (PSX) of "UC-Draw" which is our product. |
|