■ Notice of change in the software structure and price of Engineer's Studio® (2018/11/14) |
From the next release of Engineer's Studio® Ver.8, we will change the product configuration and price for Advanced and upper grades (applied from December 1, 2018).
After the revision, Engineer's Studio® section will be added to the product as a mandatory option.
According to this change, users under the subscription contract shall pay the price written in the table 1 in the link below at next contract renewal.
Before the subscription contract period for their Engineer's Studio®
expires, users can add the Engineer's Studio® Section to their Engineer's
Studio® by paying US$2,600 (+tax). The current subscription term will
not be changed.
>>Notice of change in the software structure and price of Engineer's Studio®
|
|
Software Price(Tax is not included.) |
|
|
Product name |
Price |
Engineer's Studio® Ver.9 Ultimate
Product configuration : including Engineer's Studio® section and all plug-in options except for "ES-Partial Factors Method Option" |
US$21,800
|
Engineer's Studio® Ver.9 Ultimate (not including the Maekawa model)
Product configuration : including Engineer's Studio® section and all plug-in options except for "ES-Maekawa
Concrete Model Option" and "ES-Partial Factors Method Option" |
US$14,900
|
Engineer's Studio® Ver.9 Ultimate (not including the cable element)
Product configuration : including Engineer's Studio® section and all options except for "ES-Cable
Element Option" and "ES-Partial Factors Method Option" |
US$17,000
|
Engineer's Studio® Ver.9 Advanced
Product configuration : including Engineer's Studio® section and all options except for "ES-Maekawa
Concrete Model Option", "ES-Cable Element Option", and "ES-Partial
Factors Method Option" |
US$11,000 |
Engineer's Studio® Ver.9 Lite
Product configuration : including "Engineer's Studio® Base"
and options below
- ES-Plate Element Option
- ES-Beam Model Live Load Option
- ES-Civil Structure Biaxial Section Calculation (Japan Civil Codes Section)
Option |
US$5,700 |
Engineer's Studio® Ver.9 Base
Product configuration : Standard product without option |
US$3,690 |
|
|
Option price / product configuration
|
|
Option |
Price |
Ultimate |
Ultimate
(not including the Maekawa model) |
Ultimate
(not including the cable model) |
Advanced |
Lite |
Engineer's Studio® Section |
US$3,000 |
|
|
|
|
- |
ES-Eigen Analysis option |
US$200 |
|
|
|
|
- |
ES-Dynamic Analysis Option |
US$200 |
|
|
|
|
- |
ES-MPhi Element Option |
US$700 |
|
|
|
|
- |
ES-Nonlinear Spring Option |
US$700 |
|
|
|
|
- |
ES-Fibre Element Option |
US$200 |
|
|
|
|
- |
ES-Geometrical Nonlinear Option |
US$200 |
|
|
|
|
- |
ES-Plate Element Option |
US$1,180 |
|
|
|
|
|
ES-Maekawa Concrete Model Option |
US$6,500 |
|
- |
|
- |
- |
ES-Beam Model Live Load Option |
US$200 |
|
|
|
|
|
ES-Civil Structure Biaxial Section Calculation (Japan Civil Codes Section
Design) Option |
US$1,010 |
|
|
|
|
|
ES-Civil Structure Biaxial Section Calculation (Partial Factors Method)
Option |
US$1,430 |
- |
- |
- |
- |
- |
ES-Strain Check for Steel Member Option |
US$300 |
|
|
|
|
- |
ES-Bridge Residual Displacement |
US$300 |
|
|
|
|
- |
ES-Cable Element Option |
US$4,400 |
|
|
- |
- |
- |
|
|
Academic Price
|
|
We are providing Academic licences for Educators, Academic Researchers and Students etc. |
|
Product Name |
Academic Price |
Engineer's Studio® Ver.9 Ultimate |
US$17,440 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
US$11,920 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
US$13,600 |
Engineer's Studio® Ver.9 Advanced |
US$8,800 |
Engineer's Studio® Ver.9 Lite |
US$4,560 |
Engineer's Studio® Ver.9 Base |
US$2,960 |
|
|
Upgrade Price
|
|
Product Name |
Object Product |
Price/Category |
Engineer's Studio® Ver.9 Ultimate |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
US$8,280 |
upgrade |
Engineer's Studio® Ver.9 Ultimate |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
US$5,760 |
upgrade |
Engineer's Studio® Ver.9 Ultimate |
Engineer's Studio® Ver.9 Advanced |
US$12,960 |
upgrade |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
Engineer's Studio® Ver.9 Advanced |
US$4,680 |
upgrade |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
Engineer's Studio® Ver.9 Advanced |
US$7,200 |
upgrade |
Engineer's Studio® Ver.9 Ultimate |
Engineer's Studio® Ver.9 Lite |
US$19,320 |
upgrade |
Engineer's Studio® Ver.9 Ultimate (Not including the Maekawa model) |
Engineer's Studio® Ver.9 Lite |
US$11,040 |
upgrade |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
Engineer's Studio® Ver.9 Lite |
US$13,560 |
upgrade |
Engineer's Studio® Ver.9 Advanced |
Engineer's Studio® Ver.9 Lite |
US$6,360 |
upgrade |
Engineer's Studio® Ver.9 Ultimate |
Engineer's Studio® Ver.9 Base |
US$21,740 |
upgrade |
Engineer's Studio® Ver.9 Ultimate (Not including the Maekawa model) |
Engineer's Studio® Ver.9 Base |
US$13,460 |
upgrade |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
Engineer's Studio® Ver.9 Base |
US$15,980 |
upgrade |
Engineer's Studio® Ver.9 Advanced |
Engineer's Studio® Ver.9 Base |
US$8,780 |
upgrade |
Engineer's Studio® Ver.9 Lite |
Engineer's Studio® Ver.9 Base |
US$2,420 |
upgrade |
|
|
Page Top |
Price of Subscription Service Contract
|
|
Support information
-Software upgrade -Technical inquiry (Email,
Tel) -Maintenance and update notifications via email -Download
service
* We are sequentially making a transition from the maintenance-support service
to [Subscription
Service] from April 1, 2016 in order to enhance support for diverse product usage
and to reduce license management cost. |
|
Product name |
Subscription cost of first year |
Subscription cost of subsequent years (annual cost) |
Engineer's Studio® Ver.9 Ultimate |
Free |
US$3,270 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
US$2,240 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
US$2,550 |
Engineer's Studio® Ver.9 Advanced |
US$1,650 |
Engineer's Studio® Ver.9 Lite |
US$1,260 |
Engineer's Studio® Ver.9 Base |
US$930 |
ES-Plate Element Option |
US$360 |
ES-Maekawa Concrete Model Option |
US$1,300 |
ES-Civil Structure Biaxial Section
Calculation (Japan Civil Codes Section Design) Option |
US$300 |
ES-Civil Structure Biaxial Section
Calculation (Partial Factors Method) Option |
US$430 |
ES-Cable Element Option |
US$1,100 |
|
|
Subscription Floating |
: |
40% of the product price |
Subscription USB |
: |
40% of the product price |
Subscription NetPRO |
: |
Net PRO (includes NetUPDATE):
USD940 plus subscription fee at 40% of the product price. |
WAN Activation License |
: |
Net PRO WAN (includes NetUPDATE WAN): USD1,140 plus subscription fee at 80% of the product price. |
|
|
Price of Rental license / Floating license |
(Tax is not included.) |
|
|
Rental license |
: |
Short term licenses available at a low price |
Floating license |
: |
After web activation, anyone can use the products on any PC anywhere in
the world. |
Rental access |
: |
You can increase the number of licenses you own and use these additional
licenses for a specific period of time (1 month to 3 month) at your discretion.
We will later send you an invoice based on your usage log. |
*Rental / Floating Licenses were introduced on September 2007 to enhance
user experience and convenience of our products.
*Duration of Rental / Floating Licenses cannot be changed after starting
these services. Re-application is required to extend the rental and floating
license duration.
|
|
|
●Software price |
|
■ Rental License
Product |
1month |
2month |
3month |
6month |
Engineer's Studio® Ver.9 Ultimate |
US$6,330 |
US$9,510 |
US$10,250 |
US$12,870 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
US$4,470 |
US$5,960 |
US$7,160 |
US$8,940 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
US$5,100 |
US$6,800 |
US$8,170 |
US$10,200 |
Engineer's Studio® Ver.9 Advanced |
US$3,300 |
US$4,400 |
US$5,290 |
US$6,600 |
Engineer's Studio® Ver.9 Lite |
US$1,710 |
US$2,280 |
US$2,740 |
US$3,420 |
Engineer's Studio® Ver.9 Base |
US$1,110 |
US$1,480 |
US$1,780 |
US$2,220 |
■Floating License
Product |
1month |
2month |
3month |
6month |
Engineer's Studio® Ver.9 Ultimate |
US$11,120 |
US$15,050 |
US$18,100 |
US$22,460 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Maekawa model) |
US$7,900 |
US$10,430 |
US$12,520 |
US$15,650 |
Engineer's Studio® Ver.9 Ultimate
(Not including the Cable Element) |
US$9,010 |
US$11,900 |
US$14,290 |
US$17,850 |
Engineer's Studio® Ver.9 Advanced |
US$5,830 |
US$7,700 |
US$9,250 |
US$11,550 |
Engineer's Studio® Ver.9 Lite |
US$3,030 |
US$3,990 |
US$4,790 |
US$5,990 |
Engineer's Studio® Ver.9 Base |
US$1,960 |
US$2,590 |
US$3,100 |
US$3,880 |
|
|
●Option price |
|
* Options are not to be rented separately.
■ Rental License
Product |
1month |
2month |
3month |
6month |
ES-Eigen Analysis option |
US$80 |
US$110 |
US$130 |
US$160 |
ES-Dynamic Analysis Option |
US$80 |
US$110 |
US$130 |
US$160 |
ES-M-φ Element Option |
US$250 |
US$330 |
US$390 |
US$490 |
ES-Nonlinear Spring Option |
US$250 |
US$330 |
US$390 |
US$490 |
ES-Fiber Element Option |
US$80 |
US$110 |
US$130 |
US$160 |
ES-Geometrical Nonlinear Option |
US$80 |
US$110 |
US$130 |
US$160 |
ES-Plate Element Option |
US$360 |
US$480 |
US$570 |
US$710 |
ES-Maekawa Concrete Model Option |
US$1,950 |
US$2,600 |
US$3,120 |
US$3,900 |
ES-Beam Model Live Load Option |
US$80 |
US$110 |
US$130 |
US$160 |
ES-Civil Structure Biaxial Section Calculation
(Japan Civil Codes Section Design) Option |
US$430 |
US$580 |
US$690 |
US$860 |
ES-Civil Structure Biaxial Section Calculation
(Partial Factors Method /
Specifications for Highway Bridges, 2017) Option |
US$430 |
US$580 |
US$690 |
US$860 |
ES-Strain Check for Steel Member Option |
US$120 |
US$160 |
US$190 |
US$240 |
ES-Bridge Residual Displacement Option |
US$120 |
US$160 |
US$190 |
US$240 |
ES-Cable Element Option |
US$1,320 |
US$1,760 |
US$2,120 |
US$2,640 |
■Floating License
Product |
1month |
2month |
3month |
6month |
ES-Eigen Analysis option |
US$140 |
US$190 |
US$220 |
US$280 |
ES-Dynamic Analysis Option |
US$140 |
US$190 |
US$220 |
US$280 |
ES-M-φ Element Option |
US$420 |
US$570 |
US$680 |
US$850 |
ES-Nonlinear Spring Option |
US$420 |
US$570 |
US$680 |
US$850 |
ES-Fiber Element Option |
US$140 |
US$190 |
US$220 |
US$280 |
ES-Geometrical Nonlinear Option |
US$140 |
US$190 |
US$220 |
US$280 |
ES-Plate Element Option |
US$630 |
US$830 |
US$1,000 |
US$1,240 |
ES-Maekawa Concrete Model Option |
US$3,450 |
US$4,550 |
US$5,460 |
US$6,830 |
ES-Beam Model Live Load Option |
US$140 |
US$190 |
US$220 |
US$280 |
ES-Civil Structure Biaxial Section Calculation
(Japan Civil Codes Section Design) Option |
US$760 |
US$1,010 |
US$1,210 |
US$1,510 |
ES-Civil Structure Biaxial Section Calculation
(Partial Factors Method /
Specifications for Highway Bridges, 2017) Option |
US$760 |
US$1,010 |
US$1,210 |
US$1,510 |
ES-Strain Check for Steel Member Option |
US$210 |
US$280 |
US$330 |
US$420 |
ES-Bridge Residual Displacement Option |
US$210 |
US$280 |
US$330 |
US$420 |
ES-Cable Element Option |
US$2,340 |
US$3,080 |
US$3,700 |
US$4,620 |
|
|
Version Upgrade History
|
|
The version upgrade and revision upgrade (without charge) contents are
listed as following. |
|
Engineer's Studio® |
Version |
Release date |
Updated contents |
9.0.0 |
2019/04/25 |
- 64bit version
- Simplified input of section test
- Online help
- English help
|
Development history of previous version
|
|
Product Operation Environment
|
OS |
Windows 7 / 8 / 8.1 / 10
*The software will work in both of 32 bit OS and 64 bit OS It works by OS provided 32bit emulation technology in 64bit OS. |
CPU |
(Required) Intel Core 2 Duo 2.0GHz or greater (Recommended) Highest possible performance CPU (Ex. Core i7 series) |
Required Memory (including OS) |
Greater than 4GB RAM is recommended (varies according to analysis models and analysis steps). |
Required Disk Capacity |
Greater than 500 MB for installation, few MB to tens of GB for calculation
(varies according to analysis models and analysis steps) |
Display (Image Resolution) |
More than 1280 x 800, colour number 32bit
Please use a default setting for a property of the screen and normal size
(96) for the DPI setting.
|
Extension for the input data |
es, esx |
File Export |
Only the input data: ES
Data with result: ES + folder
F8 output editing tool is supported by TXT, HTM, PPF, DOC, DOCX, PDF, JTD,
JTDC |
Linkage to other products |
<to read> Engineer's Studio®2D UC-win/FRAME(3D) UC-1/FRAME2D
SDNF file (Steel Detailing Neutral File) (SDF)
Old FORUM8 products data compatible with SI ($o1)
Acceleration file (text) (ACC)
<to save> UC-win/Section
SDNF file (Steel Detailing Neutral File) (SDF) |
Note |
A card that supports full functionality of OpenGL is required because OpenGL
is used for the 3 dimension graphics processing in this product. |
|
|
Order/Contact us
|
|
|
|
Page Top |