ButtonsEach button's action is explained in the following table. With the keyboard, you can change the speed, position and view direction.
| Button | Name | Explanation |
 |
Look About | Click left and drag the mouse to rotate the camera. |
 |
Move In and Out | Click left and drag the mouse up or down to move forward or backward. |
 |
Panning | Click left and drag the mouse to pan the camera up, down, left or right. |
 |
Flying About | Click left and push the mouse up to start the flight, then move the mouse to pilot the camera. |
 |
Spinning | Select a model, then click and drag the mouse to spin around the selection. |
 |
Satellite | Click on this button to see the scene from the sky, then use the mouse wheel to change the altitude and click and drag to pan the camera. |
 |
Pedestrian | Runs a walking simulation. Select your course in the dialog and enjoy the trip. Use the mouse to rotate the camera (keyboard commands are only available on the road.) |
 |
Pause/Continue Driving | During a drive or flight, this button pauses and resumes the simulation. During a pause, camera movements are available. |
 |
Drive on Road | Drive simulation on the road selected in the instruction dialog. |
 |
Fly Flight Path | Flight simulation on the path selected in the instruction dialog. |
 |
Visual Options | Visual options. |
 |
Traffic Movement | Run a traffic simulation. |
 |
Environment Movement | Animates flags, 3D trees, rain or snow and 3D characters. |
 |
Orthographic View | Shows the current position from above in a separate form. |
 |
Run scripts | To execute scripts. |
 |
Edit Traffic Generator | Edit traffic properties. |
 |
Run Traffic Simulatin | Run a fast and invisible traffic simulation according to the traffic configuration set in [Edit Traffic Generators]. Usefull when in a real time simulation, vehicles take too much time to appear in certain part of the network. |
 |
Reset Traffic Simulation | Resets the current traffic simulation. |
 |
Camera View | Show a secene selected by saved camera position in an indivisual window. |
Switching models to showDepending on the data, several configurations of model visibility are listed in the Before/After list.
 |
Before/After | Switch between the different configurations. |
Changing viewpoint while driving or flyingYou can change the viewpoint using numeric key pad while driving or flying.
Note : Please set the Num Lock "On" before using these commands.
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| left backward |
backward | right backward |
left | down | right | left forward |
forward | right forward |
Save and restore camera positionsRight click in the scene a select "Save Camera Position". Positions are saved in order from 1 to 10. To restore the view to a saved position, press the alpha-numeric keys 1 to 0.
Changing the speed, the position and the direction of the cameraHowever you can operate fine movements as in the released version, the key mapping is different.
In the viewer version, the key map is as below.
Note : Be careful that in this table, numbers are keypad numbers.
Note : Set on Num Lock before.
(1) When
Look About, In and Out, Panning, Pedestrian| Operation | Key for Web version | Key for Release version |
| Move forward | Ctrl + 8 |  |
| Move backward | Ctrl + 2 |  |
| Move left | Ctrl + 4 |  |
| Move right | Ctrl + 6 |  |
| Move up | Ctrl + 9 | Alt + |
| Move down | Ctrl + 3 | Alt + |
| Speed up | Ctrl + 7 | Q |
| Speed down | Ctrl + 1 | A |
| Speed reinitialization | Ctrl + 0 | Z |
| Look up | Alt + 8 | Ctrl + |
| Look down | Alt + 2 | Ctrl + |
| Look left | Alt + 4 | Ctrl + |
| Look right | Alt + 6 | Ctrl + |
| Angle speed up | Alt + 7 | W |
| Angle speed down | Alt + 1 | S |
| Angle speed reinitilalization | Alt + 0 | X |
(2) When
Driving on the road| Operation | Key for Web version | Key for Release version |
| Speed up | Ctrl + 8 | |
| Speed down | Ctrl + 2 | |
| Move to the left lane | Ctrl + 4 | |
| Move to the right lane | Ctrl + 6 | |
(3) When
Fly About| Operation | Key for Web version | Key for Release version |
| Speed up | Ctrl+7 | |
| Speed down | Ctrl+1 | |
Manual Driving(1)How to move into the cockpit
Load the data and click on a vehicle with [Ctrl] and [Alt] to move into the passenger seat. Press the Enter key to become the driver and drive the vehicle with your controller.
Note : You need to connect the hardware controller.
Steeling controller (Handle, accelerator)(2)Show navigation monitor in the cockpit
You can make show the scene on the navigation monitor in the cockpit
 |
Switch camera position on the navigation monitor |
Switch camera position on Navigtion monitor in the cockpit. |
[Contact for UC-win/Road]
| e-mail:road@forum8.co.jp |
