FORUM8 Design Festival 2010-3Days
FORUM8 Design Festival2010-3Days
Lecture overview/Introduction of lecturers


Day1 The 4th Design Conference - Stream-1 Civil Design/Analysis Session
The 4th Design Conference - Stream-2 Architecture¥BIM Session
The 4th Design Conference - Stream-3 Hydraulic Engineering Session

Day2 The 11th UC-win/Road Conference Main session
The 11th UC-win/Road Conference Driving simulator session
The 4th International VR Symposium World16 Presentations


Wednesday, November 17, 2010 : FORUM8 Design Festival Day1

The 4th Design Conference
Stream-1 Civil Design/Analysis Session (Maiogi)
Special Lecture 1 10:00 - 11:30
"The latest technology and future in civil engineering. Design criteria, experiment with large model, and verification example using E-Defense"
Masaaki Yabe Chodai Co., Ltd

Presentation Outline
The engineers have less consious for setting down the design criteria in Japan, though it is the task of the enginners in the overseas project as well as it is the exciting work enabling the judgement based on actual information with uncertain factors. He will introduce the relationship between the design criteria of each structure element and the test result of large model with the example of road bridges, and the validation example using E-Defense.
Lecturer's Profile
Doctor(Engineer), Professional Engineer(Construction and general technology administration sector)Committee member of Earthquake engineering association, Society of Civil Engineers, / Vice chairman of the association of bridge seismic design method based on the capability, committee member of seismic design, Japan road association
Special Lecture 2 13:00 - 14:00
"Introduction of structural analysis . structure sensitivity "
Hiromichi Yoshikawa Risk management laboratory, Tokyo City University

Presentation Outline
Prof. Yoshikawa will introduce amusingness of numeric simulation with the case examples for the effect (structure sensitivity) of input parameters in structure analysis.
Lecturer's Profile
Earthquake engineering association, Society of civil engineers: Chairman of the seismic risk management and continuity association
Special Lecture 3 14:00 - 14:45
"Case studies of examining and analyzing seismic capacity of river structures using FRAME3D"
Makoto Kanai Oyo Technology Co., Ltd

Presentation Outline
Mr. Kanai will introduce the analysis examples of the existing or new river construction in accordance to the seismic checking guideline of river structures (Provisional) and the adjunct explanatory.
Lecturer's Profile
Analysis project department, Oyo Technology Co., Ltd
Special Lecture 4 15:00 - 15:45
"Seismic verification based on seismic deformation method for the large-scale drainage pumping station using Engineer's Studio, UWLC"
Haruhiro Hori Sanyu Consultants Inc.

Presentation Outline
A large-scale drainage pumping station is too complex to represent the rigidity of building frame in the seismic qualification check by 2D frame analysis. Mr. Hori will introduce the seismic qualification check using the elasto-plastic model with laminated plate whose rigidity is modeled in 3D and UWLC.
Lecturer's Profile
Professional Engineer(Construction and steel structure, concrete sector)
Special Lecture 5 15:45 - 16:30
"The latest function of geotechnical analysis series and the new banking method guideline"
Keizo Ukai Professor, Gunma University

Presentation Outline
Prof. Ugai will introduce the case example of the collapse of large slope and deep layer caused by earthquake, the result of dynamic FEM analysis, the new technology of 3DVR simulation for rock slope collapse.
Lecturer's Profile
Chairman of the Japan Landslide Society(2010,2011)
Special Lecture 6 16:30 - 17:15
"Stability analysis of retaining wall placed in landslide area with soft rock .stability analysis using static FEM"
Toshihiro Hanada President, Bulld Geotechno Co.,Ltd.

Presentation Outline
Mr. Hanada will introduce the stability check using FEM with the example of the concrete retaining wall to be placed in the slope failure area of the soft rock ground in Fukuoka.
Lecturer's Profile
Professional Engineer(Construction and general technology administration sector), He currently works as a grading desinger(earth structure, retaining wall) with twenty years of experience in the bulldozer.
Presentation 1 11:30 - 12:00
"Report of E-Defense blind analysis competition and introduction of the latest function of UC-win/FRAME(3D)¥Engineer's Studio."
Analysis support team, Technical support group, FORUM8

Presentation Outline
Kai will introduce the latest functions of UC-win/FRAME(3D) and Engineering Studio. which led to the 1st prize of the E-Defense blind analysis contes two years in a row.
Presentation 2 17:15 - 17:30
"The latest function of geotechnical analysis series and the new banking method guideline"
Atsushi Nakamura, UC-1 Development Group1, FORUM8

Presentation Outline
Nakamura will present the GeoFEAS 3D, Rock fall simulation, the revised contents of " Guideline for embankment construction", and the compliance in the slope stability calculation and VG Flow 2D)
Stream-2 Architecture¥BIM Session (Hanautage)
Special Lecture 7 13:00 - 14:00
"EXODUS : The Latest in Evacuation Modelling"
Ed Galea FSEG (Fire Safety Engineering Group), University of Greenwich, UK

Presentation Outline
Prof. Galea will introduce the latest developments in the field of evacuation modeling. EXODUS is capable of modeling evacuations in buildings, ships, airplanes and trains.
Moreover, his SMARTFIRE software program can simulate smoke and heat distribution, which are also fatal factors in fire. He will let us know this year, what his latest findings are and the latest additions to his software programs.
Lecturer's Profile
Prof. Galea is the founding director of the Fire Safety Engineering Group at the University of Greenwich and he developed the highlyaccurate, market-leading evacuation modeling software, EXODUS.
In 2006, FSEG and FORUM8 agreed on a partnership and the link between UC-win/Road and EXODUS was developed.
Special Lecture 8 14:00 - 14:45
"Evacuation guidance system, SWGS-light stirage type"
Yukio Ota NPO Sign Center

Presentation Outline
Mr. Ota is experienced in establishing the domestic and international standards of evacuation guide system during the occurrence of disasters for thirty years. He established the original idea of JIS of evacuation guiding system by the phosphorescence line. He will introduce the latest results. He will also introduce the world leading prototype of a secure evacuation guide during disaster without changing the usual interior.
Lecturer's Profile
Administrative director of NPO sign center, past master of Japan society for science of signs, Symbol mark design and emergency exit sign design of Ministry of Economy and Public Works and Services. Book" Pictogram design"
Special Lecture 9 15:00 - 15:45
"Build Live Tokyo 2010 (BLT2010) and the latest information of BIM"
Junichi Yamashita IAI Japan

Presentation Outline
BLT2010 is the virtual live design competition that is opened via internet in real time how the collaborated teams work BIM. They perform analysis, simulation, and presentation after creation of 3D model in 48 hours for the working-level class, 96 hours for students.
Lecturer's Profile
President, CI Labo Co.,Ltd., IAI Japan Chapter Vice Chair, C-CADEC:Construction-CAD Data Exchange Consortium chair, Standardization of Construction Information Committee member.
Yamashita is involved in the creation of IFC for 3 dimensional building model for years and is making the international standards of electronic tender as a project leader of UN/CEFACTof United Nations Economic Commission for Europe. Vice chair of TBG6.
Presentation 3 15:45 - 16:30
"BuildLive TOKYO 2010"
Jun Imaizumi, VR-support Group, FOROUM8

Presentation Outline
Imaizumi will introduce the result of team F8W16 who joined in BLT2010 for 48 hours on October 13-15 including the latest BIM&VR solution using UC-win/Road and Allplan.
"EXODUS/SMARTFIRE"

Presentation Outline
He will introduce the case study of evacuation behavior analysis, and the crowd behavior analysis.
Presentation 4 16:30 - 17:15
"New functions of AllPlan"
"New functions of AllPlan"

Presentation Outline
Masaharu Taguchi, BIM team, FORUM8 He will introduce the new function of BIM software, Allplan.
"Design Builder"
Naoki Endo, Technical support group , FORUM8

Presentation Outline
He will introduce the functions which support for environmental simulation and energy saving design.
Presentation 5 17:15 - 17:30
"UC-1 architecture design solutions"
Ichiro Matsuura, UC-1 Development Group3, FORUM8

Presentation Outline
He will introduce the UC-1 series, architecture design solution. (Architecture pile foundation / Basement car parking)
Stream-3 Hydraulic Engineering Session (Hanashirabe)
Special Lecture 10 13:00 - 14:45
"The latest rainstorm disaster and the future development of the flood inundation analysis technologies"
Yosihisa Kawahara Hiroshima University Graduate School

Presentation Outline
Prof. Kawahara will introduce the recent disaster caused by heavy rain and point out the tasks occurred in the disaster. He will also present the research contents (use of laser profiler data, representation of urban structure) of flood analysis method (outer/ inner water) which serves the main method while building design and hazard map creation with his idea for the future development.
Lecturer's Profile
Specialty area: Hydraulics, river engineering Research theme: Flood control measures of basin, maintenance studies of ecological environment
Special Lecture 11 13:00 - 14:45
"Evaluating microorganism contamination by combining the result of urban flood analysis and water quality test"
Hiroaki Furumai Research Center for Water Environment, Department of Urban Engineering, Graduate School of Engineering, University of Tokyo

Presentation Outline
It is expected that the lakes in city of Hanoi have the restraint efficacy to washout in heavy rain. Prof. Furumai will introduce the result of water quality monitoring including the indicator of pathogenic microbe in fine weather/raining. He will also evaluate the functions of drainage and rainwater storage of the lake and introduce the result of microbial pollution with seepage analysis.
Lecturer's Profile
Specialty area: Urban environmental engineer Research area: Urban storm management
Special Lecture 12 15:00 - 17:30
"Risk management of rainwater drainage and flood in the urban area"
Masaru Morita Shibaura Institute of Technology

Presentation Outline
Prof. Morita will clarify the existance value of swmm in urban rainwater drainage. The entire frame of flood risk management is presented by the quantification of flood risk by integrating the flood model and flood damage calculation model.
Lecturer's Profile
Professor, Shibaura Institute of Technology. Majoring in hydrology of city and underground water
Special Lecture 13 15:00 - 17:30
"Utilization of runoff analysis model"
Ishikawa Takateru Water Environment Construction Club

Presentation Outline
The utilization of 1d/2d model for the provision of record rain occurred in these days and flood risk reduction is discussed. A panel discussion will be held for the basic of runoff analysis and the applied scope of model with worldwide leaders of rain issues, three professors and users of xp-swmm.
Lecturer's Profile
Water Environment Construction Club Commissioner of Nihon suiko sekkei Co., Ltd
" Utilization manual of runoff analysis model " (Issued in 1999) Secretary-general
"Guideline of inner water hazard map creation" (Issued in 2006) Commissioner
Presentation 7 15:00 - 17:30
"Challenges in 1d/2d Integrated Modeling (Case studies using xpswmm2d)"
Ashis Dey Principal XP-software Pty Ltd.

Presentation Outline
Dr. Principal will introduce increasingly popular overseas trends of the integrated flood model and the research of flood risk management.
Presentation 8 15:00 - 17:30
"Analysis of hydraulic design series and UC-win/Road for xpswmm"
Makoto Hada, UC-1 Development Group, FORUM8

Presentation Outline
Hada will present on the development concept and utilization of UC-win/Road for xpswmm which enables visualization of the flood analysis result in VR. He will explain the acknowledgement and implementation of flood risk by improved quality and amount of the hazard map in next generation using VR. He will also explain the visualization of tsunami analysis result by UC-win/Road for Tsunami.



Page Top Page Top


Thursday, Novermber 18th, 2010 : FORUM8 Design Festival Day2

The 11th International VR Conference
The 11th UC-win/Road Conference Main session (Maiogi)
Special Lecture 1 13:00 - 14:00
"Uses of UC-Win/Road in a 3D simulation software for training Road and Tunnels operators"
Philippe Marsaud Technical Director, BMIA

Presentation Outline
Mr. Marsaud has developed a software program for training tunnel operators He will introduce his software program for training tunnel operators and the reasons for using simulators for training. He will also teach us how tunnels are operated and tell us what he envisages in the area of tunnel operation in the future.
Lecturer's Profile
Technical Director of BMIA, France.
Special Lecture 2 14:00 - 14:30
"Traffic studies considering the aspect of traffic users"
Lee Dongmin Korea Transport Institute(KOTI)

Presentation Outline
Mr. Lee Dong min will lecture on the need to utilize VR technology as an effective method in the investigation and analysis of traffic users.
Lecturer's Profile
Specialty area: Road design, traffic safety and human factor
Special Lecture 3 14:30 - 15:00
"Energy analysis and reduction in the built environment : the case for BIM and visualisation technologies"
Nashwan Dawood Teesside University

Lecturer's Profile
Prof. Dawood is currently the director of the Centre for Construction Research and Innovation at the University of Teesside and he has an extensive experience in the field of project and construction management and the application of IT in the construction process. This has ranged across a number of research topics including sustainability, Information Technologies and Systems (4D,VR,Integrated databases).
Special Lecture 4 15:15 - 15:55
"The growth of the 3D visualisation Market in USA"
Michael Manore TRB Visualization in Transportation Committee, FORUM8 advisor

Presentation Outline
Mr. Manore will introduce the case studies of a various projects including the federal road bureau based on his experience. He will also explain the current traffic visualization technology research status and the future vision.
Lecturer's Profile
Chair of the TRB Visualization in Transportation Committee, Cochair of the Road Safety Simulation Steering Committee, Chair of the International Human Factors Guideline for Road System Design, FORUM8 Consultant
Special Lecture 5 15:55 - 16:40
"Modeling using data measured by MMS for maintenance management"
Keiichi Nishikawa Mitsubishi Electric Corporation

Presentation Outline
It is important to trace the interannual change for the operation and maintenance. Mr.Nishikawa will present the modeling method which allows the interannual change resulted from the data measured by MMS. He will also explain the deformation calculation of the tunnel as a case example.
Lecturer's Profile
RFID¥LBS system engineering center, electric system departement, Mitsubishi electric corporation
Presentation 1 10:30 - 12:00
"Current condition of development and future expansion of UC-win/Road and VR-Studio."
Yuji Ito, FORUM8 CEO / Katsumi Matsuda, System Sales Group, FORUM8 / Pencreach Yoann, UC-win/Road Group, FORUM8 / Alistair Ward, Senior engineer, FORUM8 NZ

Presentation Outline
FORUM8 will explain and demonstrate the new functions of UC-win/Road 5, Cloud project with the METI, point-cloud modeling, 3D scan service, UCwin/ Road for RoboCarR, the future development of UC-win/Road Ver.6 and VR solutions.
Presentation 2 16:40 - 17:00
"UC-win/Road Point-cloud plugin/12d Model"
Isamu Okaki, System Development Group, FORUM8

Presentation Outline
Okaki will present the point cloud data plugin and 12d model plugin with the demonstration.
The 11th UC-win/Road Conference Driving simulator session (Hanautage)
Special Lecture 6 13:00 - 14:00
"Utilization of driving simulator for detecting driver's condition"
Muneo Yamada Meijo University

Presentation Outline
Mr. Yamada will introduce the approach of his laboratory for the evaluation system development with driving support system and DS. He will present the technology of wake-promoting to the fatigue condition by the fragrance and the driving capability evaluation.
Lecturer's Profile
Associated professor, Meijo University
Special Lecture 7 14:00 - 15:00
"Research to define driving simulator performance and vehicle dynamics fidelity requirements for training driving skills"
William L. Curtice VSAT, USA (Virtual Simulation & Training Inc.)

Presentation Outline
VSAT (Virtual Simulation and Training) is a specialist in virtual simulators used in training. VSAT covers every aspect of training simulators . from military to driver training. Mr. Curtis will share with us his expertise in driving simulators used in training and the need for high quality vehicle dynamics in training simulators.
Lecturer's Profile
He entered VSAT after 37 years of training system development in the US air force. He is currently developing the virtual simulation and training system as the vice president for development.
Special Lecture 8 15:55 - 16:40
"RoboCarR and VR which accelerate the research and development of next generation mobility, EV"
Yoko Imanishi ZMP INC.

Presentation Outline
Lately, the spread of electronic vehicle and the robotization have been rapidly progressed, and RoboCar series provide the development environment where a variety of ideas can be verified.
Ms. Imanishi will introduce the solution of ZMP including the 1/10 sized of the actual vehicle, car robotics platform "RoboCar 1/10" used in more than 70 companies and academic institutions and the new "RoboCar Micro EV" in actual sized vehicle, and the linkage with VR.
Lecturer's Profile
Department of New project, ZMP Inc.
Presentation 3 15:15 - 15:55
"UC-win/Road Ver.5 DrivingSIM functions"
Pencreach Yoann, UC-win/Road Group, FORUM8

Presentation Outline
He will explain the overview of driving simulation and introduce the improvement of the latest vehicle moving model, the linkage with other DS software, and the motion platform.
Presentation 4 16:40 - 17:00
"Current condition of robot development . UC-win/Road for RoboCarR"
Hafid Niniss, System Development Group, FORUM8

Presentation Outline
He will introduce the VR simulation system with the linkage of UC-win/Road and the world first car robotics platform" RoboCarR" and the linkage with AR (virtual reality) technology.
The 4th International VR Symposium World16 Presentations (Yumeogi)
World16 - 01 10:40 - 11:00
Thomas Tucker College of Arts and Sciences Winston-Salem State University, USA
"The Al Bastakiya Cultural Quarter"

Presentation Outline
Mr. Tucker will present the representatio of Al Bastakiya Cultural Quarter in Dubai's historic area. He will build and integrate 3D models.
World16 - 02 11:00 - 11:20
"Using UC-win/Road to support public engagement and participatory design on major city-building projects"
Michael Jemtrud/Heather Braiden McGill University, Canada

Presentation Outline
Mr. Jemtrud and Ms. Braiden will use UC-win/Road as part of a larger public design study, Integrated Dissemination Forums for Architecture and Urban Design.
World16 - 03 11:20 - 11:40
"VR applications in project management: scheduling and reporting"
Wael Abdelhameed University of Bahrain, Bahrain

Presentation Outline
Mr. Abdellhameed will introduce the project management monitoring for a building construction process using micro simulation player.
World16 - 04 11:40 - 12:00
"Development of optimizing system from 3D laser scanner data to VR for urban design study"
Tomohiro Fukuda Osaka University, Japan

Presentation Outline
Mr. Fukuda will introduce the development of the geometrically-based optimizing system for use 3D laser scanner data in UC-win/Road.
World16 - 05 13:00 - 13:20
"Virtual downtown Santiago: 1810-1910-2010"
Claudio Labarca/ Rodrigo Culagovski Pontifical Catholic University, Chile

Presentation Outline
Mr. Labarca and Culagovski will propose a visualization of the historical and morphological changes that have occurred within Santiago's foundational city blocks.
World16 - 06 13:20 - 13:40
"Isovist Analysis Realized through Point Cloud Visualization in UC-win/Road"
Matthew Swarts Georgia Institute of Technology, USA

Presentation Outline
Mr. Swarts will present the utilization of spatial amount in store design and the spatial analysis function including visualization environmental elements in GIS.
World16 - 07 13:40 - 14:00
"About interaction between pedestrians and traffic flow"
Paolo Fiamma University of Pisa, Italy

Presentation Outline
Mr. Fiamma will present the public car parking that the Municipalities of Pisa has recently built in the south side of the ancient town.
World16 - 08 14:00 - 14:20
"Media field navigation"
Marcos Novak University of California, Santa Barbara, USA

Presentation Outline
Mr. Noavk will present the development of plug-in which allows the linkage of external application with UC-win/Road without the knowledge of Delphi.
World16 - 09 14:20 - 14:40
"Interactive device"
Taro Narahara New Jersey Institute of Technology,USA

Presentation Outline
Mr. Narahara will present the improvement of the interface between UC-win/Road and a physical environment and the production of a platform that can promote collective production by multiple designers.
World16 - 10 14:40 - 15:00
"RGU new car park and Dee Bridge decongestion"
Amar Bennadji Robert Gordon University, UK

Presentation Outline
Mr. Bennadji will present the project for the problems of traffic congestion pollution caused by relocating the campus of Robert Gordon University and the creation of a new car park.
World16 - 11 15:15 - 15:35
"Personal informatics: Life paths"
Kostas Terzidis Harvard University, USA

Presentation Outline
Mr. Terzidis will explain the representation of personal memories using VR. The research theme of SNS based on the positional information will be presented.
Representative of W16 15:35-15:55
"City Design Generation without Scripting"
Yoshihiko Kobayashi Prism Lab / Arizona State University, USA

Presentation Outline
Mr. Kobayashi will present the development of a computational design tool for automatic city generation. The created urban model will be presented.



Page Top Page Top
back
Back

FORUM8