New Products & Service | UC-1 | |||
Pier 3D bar arrangement English version Foundation 3D bar arrangement English version
|
||||
|
Introduction |
In this topic, we will introduce new English products "Pier 3D bar arrangement (Japanese standard / English version)" and "Foundation 3D bar arrangement (Japanese standard / English version)" and existing UC-1 products provided in foreign languages. |
Pier 3D bar arrangement (Japanese standard / English version) |
Foundation 3D bar arrangement (Japanese standard / English version) |
Foundation 3D bar arrangement Ver.2 English edition This program supports the calculation and material design by using the seismic method and the ultimate lateral strength method and allows users to review a variety of foundation methods and foundation types in detailed design level. It has functions of the sharing of geological layer and action force data, the data check in 3-sided drawing, the result display with drawings, and the [standard value]. Design sheets of each foundation and comparing sheets of different foundation can be exported. As for the pile foundation, 13 pile types including the steel pipe soil cement pile are available. This program corresponds to each construction method and reinforcement design (pile for reinforcing). A bar arrangement drawing and rebar list and etc. can be created at once from a general drawing. This program is equal to the Japanese Standard version of Foundation 3D bar arrangement.
|
3D bar arrangement viewer function |
The 3D bar arrangement viewer shows 3D models of civil structures and rebars
in real dimension and allows users to check complex bar arrangements. Data
can be saved and exported in data format of "3D bar arrangement CAD"
and "Allplan" that FORUM8 sells separately. This function enables
the secondary use of 3D models. In addition, "3D bar arrangement CAD"
has a check function of bar arrangement interference. Users can easily
check bar arrangements by using 3D models exported from this viewer.
|
Cooperation between Pier design and Foundation design |
When the foundation format in the Pier 3D bar arrangement is "Pile
foundation" or "Pile foundation 2.5 dimension analysis",
the program data can be cooperated with the data of Foundation 3D bar arrangement
in real time. Compared with the general file cooperation, data is exchanged
seamless in both directions. This enables an integrated design, reduces
the work burden, and improves the work efficiency.
|
Lineup of UC-1 products in foreign languages |
English ・Temporary sheathing work design 3DCAD (Japanese standard / English version) Ver.8 ・Temporary piled jetty design 3DCAD (Japanese standard / English version) Ver.4 ・Double wall cofferdam design 3DCAD (Japanese standard / English version) Ver.2 ・Dynamic effective stress analysis for ground (UWLC) English version Ver.2 ・Geotechnical Finite element Elastoplastic Analysis Software (GeoFEAS) 2D English version Ver.4 ・GeoFEAS Flow3D English version ・UC-Draw (English version) Ver.4 ・3DCAD Studio® (English version) The Japanese standard / English version products are based on the Japanese version programs with the interface and calculation sheet are translated in English. The standards and calculation functions are the same as the original Japanese programs.
Chinese ・RC section calculation (Chinese standard / Chinese version) ・Abutment design 3D bar arrangement (Chinese standard / Chinese version) Ver.2 ・Temporary sheathing work design 3DCAD (Chinese standard / Chinese version) Ver.2 ・3D slope stability analysis 3DCAD (LEM) Chinese version Ver.2 The Chinese standard / Chinese programs are based on the Japanese version of each product and correspond to the Chinese standards (excluding LEM). The basic operations and features are the same as the original Japanese products.
|
Conclusion |
FORUM8 will continue to improve and enhance products in foreign languages. |
(Up&Coming '18 Fall issue) | ||
|