 |
 |
 sway of lights |
Earthquake wave date |
To reproduce the shake, we use the data of the seismic waveform. By loading data on the time change of speed or acceleration at a certain point, the model (such as the floor of the building)will be shaken, and all the models placed on the model are affected further by shaking and are shaken Simulation is performed by flow. Therefore, the waveform data necessary for the simulation is not the one for each object, but the observation data at a specific point is used, and it is also possible to read the observation data of the actually generated earthquake.
Model setting case：falling of cabinet
When it is come to cabinet,You can arrangeanother model on the shelf by dividing the object for each plate of each face (image is an example of book model). Also,setting the joint of the hinge to the object of the door makes the door move according to the shaking of the cabinet itself. In this state, simulation was performed, as indicated by the images. The door opens according to the setting of the hinge when shaking is added, and the inner model spills down by further inclining the shelf. When the shelf falls, all models placed on the shelf will fall to the floor, causing scattering and folding. In addition, the influence of gravity is taken into consideration when falling of an object, and it becomes a dynamic simulation including not only the result but also the movement.
We are introduing earthquake simulation user cases on our homepage. The lates sample room and earthquake simulation are presented on the website, please have a check.
 |
 |
| Case of cabinet falling |
|
